Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981

610-916-0666

Search Results

Page: 1 of 9
Automatic PS Top Labeler

- Mild and stainless construction
- Adjustable height
- 64"L x 3-1/4"W tabletop conveyor
- 4-1/2" max label height
- Air box label applicator
- Adjustable pitch
- 115 volts
- OAD: 64"L x 36"W x 68"high
Stock#: 12881
In Stock
Avery 500 Labeler

- Stand mounted head with X & Y adjustment table.
- 115V - 8 amps
Stock#: 12317
In Stock
Avery 500 stepper driven w/ touchpad controls

- High speed stepper motor driven model 500 style labeling head mounted on adjustable 3 axis stand.
- Handles up to 7" wide label web.
- Accurate dispense speeds up to 3200" per minute plus.
- Touch pad interface for all settings automatic low label warning / no web shutoff.
- Unit can either run at user set speed (easily repeatable with interface) or encoder following package for automatic synchronization.
Stock#: 12103
In Stock
Avery ALS Labeler

- Avery table top model pressure sensitive labeler
- Label sizes up to 6" wide, 39" long.
- High-resolution microprocessor-controlled stepper motor to position labels accurately and reliably - Speeds up to 83 feet/minute (996"/min)
- Voltage required is 240 / 220 / 110 volts.
- Date of Mfg. is 01 / 96.
-Not Table Top
-Full Auto to be Mounted as per Requirement
Stock#: 12347
In Stock
Avery ALS Labeler

- Avery table top model pressure sensitive labeler
- Label sizes up to 6" wide, 39" long.
- High-resolution microprocessor-controlled stepper motor to position labels accurately and reliably - Speeds up to 83 feet/minute (996"/min)
- Voltage required is 240 / 220 / 110 volts.
- Date of Mfg. is 01 / 96.
- Not Table Top
-Full Auto to be Mounted as per Requirement
Stock#: 12361
In Stock
Avery High Speed Horizontal Pharmaceutical Labeler

- Fully automatic high speed vial syringe or carpoule labeler (small diameter large length products.) - Integrated vertical tray infeed singulation and tray restacker.
- Unit last running 350 cpm plus on carpoules w/ barcode and presence of label verification/reject system.
- Handles up to 4 1/4 inch wide label web.
Stock#: 12064
In Stock
Avery Labeler

- Stand mounted head with vertical adjustment.
- 115V - 4 amps
Stock#: 12319
In Stock
Avery Primeline XL2

- This is a high-speed front and back labeling machine equipped with 2 Avery XR-17 heads capable of labeling a liner width up to 4 1/8 inch. A main drive powers the conveyor twin screw infeed top stabilizer and both heads. Each head is cycled via stepper controller.
- Powered unwind to an airbox maintains label tension for accurate placement.
- The controls are all mounted overhead and there is a status light and start up alarm present.
- The machine is capable for up to 1500 cycles per minute and the labeling heads can feed a maximum of 2500 inch per minute.
- The conveyor is 3.25" tabletop chain x 14' long.
- The overhead stabilizer is 10feet long.
- Powered by 220V single phase @ 30amps.
Stock#: 12407
In Stock
Avery XR 17 Labeling Head

- High Speed Labeling Head
- Can apply labels up to 4" tall
- Maximum label roll diameter is 16"
Stock#: 12398
In Stock
Avery XR 17 Labeling Head

- Stand mounted
- Can apply labels up to 4" tall
- Maximum label roll diameter is 16"
Stock#: 12399
In Stock
CVC Automatic Top and Bottom Labeler

- CVC "B" size heads
- Label width 4-3/4" max
- Label length 5/8" min to 10" max
- Product thickness 1" min to 6" max
- Stainless steel and aluminum construction
- Caster mounted
- Foot print: 56"L x 28"W x 59-1/2" Tall
- 110 Volts @ 4.4 amps
Stock#: 13103
In Stock
Front and Back Labeler

- High speed stepper driven unit.
- Dual infeed screw alignment system.
- Mechanically integrated top hold down belt.
-Pressure Sensitive Label Applicator
-Automatic Labeler for Spot Application
-2 Labeling Heads (Front & Back)
-Mounted On Thru-Conveyor
-Stepper Type Motor
-Up to 7" High Labels


-Volts: 115
-Hz: 60
-Amps: 20
-PH: 1

-Length: 203in
-Width: 60in
-Height: 70in

Conveyor:
-Inline Belt-Driven
-Length: 203in
-Width: 3-1/2in
Stock#: 12353
In Stock
Page: 1 of 9
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.