Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981

610-916-0666

View Machinery by Category
-OR-
Page: 1 of 2
Aidlin Cap Elevator Sorter

- Hopper / elevator cap feed system
- 20 cu ft cap hopper
- Electrical - 460 Volt - 3 phase - 60 hz - 30 FLA
- Cap chute height is 96"
- Chute exits on right side of elevator
- Footprint 4' x 5' x 10' high
Stock#: 13036
In Stock
Aidlin Cap Elevator Sorter

- Highly efficient cap orientation and elevation wiith small footprint..
- Last running 43 mm caps
- Orients plastic or metal closures 20mm. to 120mm
- Orient Push-Pull Sports caps at rates up to 650 cpm
- Quick change-over with patented "Speed bump"
- All stainless steel wash-down construction
- Variable speed control
- Aidlin patented 3 in one Cap Feeder orientates based on the geometry of the closures.
- Parts are gently lifted up from the bulk hopper.
- Properly orientated caps continue traveling vertically to the discharge chute and the discriminated parts return to the bulk hopper for recycling.
- The properly orientated closures are then conveyed to the capper through either a chute or an Aidlin Cap Conveyor.
- Clean-out door to ensure all caps are out of hopper for quick changeover
- 20 cubic feet bulk hopper
- Left or right hand dischargeOptions
- Clear Lexan dust cover on hopper for sanitation
- Anti-static belt for metal closures
- Low level sensor and signal for hopper replenishment
- 40 cubic feet bulk hopper
- Dual discharge outlet chute
- Can Confugure with Dual "T" cleat to accommodate both beverage and sports caps
- Large capacity hopper reduces materials handling and labor requirement for replenishment of the feeder
- Parts replenishment is done at a safe floor level.
- Gentle handling of caps suitable for fragile tamper-evident rings or thin walled closures
- Low maintenance
- Suitable for placement remotely from the capper thus conserving floorspace and reducing traffic
- Quick changeover to accommodate different size closures. Aidlin Cap Feeder can be connected to Flat Top Air Trans conveyor to allow any remote location of the equipment
- From a standard basic modular design the Aidlin Cap Feeder is adaptable to suit your plant layout and production requirements


(9020 KHS MonoBlock
Stock#: 12475
In Stock
Capmatic Pharmaceutical Grade Centrifugal Cap Sorter

- All Stainless Steel Highly Polished Construction or Chrome Finish
- 24" Centrifugal sorter with backlog and cap level sensors.
- Lexan hinged bowl cover with chute opening
- Chrome three legged adjustable stand
- 230V / 1 / 60hz
Stock#: 12835
In Stock
Consolidated Centrifugal Cap Sorter Feeder

- 30" centrifugal bowl
- DC variable speed drive
- Cast iron base with adjustments
Stock#: 13039
In Stock
Cozzoli Cap Elevator Sorter

-Overall Height: 129in.
-Current Discharge Height: 85in.
-Hopper Width: 26in.
-Hopper Height: 40in.
-Hopper Length: 40in.
-Hopper Capacity: 24 cubic ft.
-Elevator Width: 24in.
-3/8in. cleats w/ 6in. Centers
-Stainless Steel Construction
-Face of Hopper Hinged for Easy Clean-Out
Stock#: 13170
In Stock
Filler Capper Sorter

-CP
-Bulk Cap Feed System
-All Stainless Steel
-Shrouding
-Goes w/ Crown 100valve (13227)
-Cap Cleaner w/ Pump

-Length: 70in
-Width: 66in
-Height: 80in
Stock#: 13229
In Stock
FMC Vibratory Parts Feeder

-30 inch diameter vibratory bowl.
- Indexing air cylinder drop.
-Overall height 78 inch Discharge height 42 inch.
-Mounted on heavy duty tubing stand.
-Last running measuring cup for iced tea product.
Stock#: 12008
In Stock
Hoppman FT 50 Centrifugal Sorter

- In Excellent Running Condition
- Includes Electrical Interlocks on Covers

Diameter: 70in
Circumference of Dome: 220in
Height: 52in
Dome Height: 26in
Stock#: 13261
In Stock
Hoppmann FT 50 Centrifugal Sorter

Centrifugal Feeder

- In Excellent Running Condition
- Includes Electrical Interlocks on Covers

Diameter: 68in
Circumference of Dome: 213.62in
Height: 62in
Dome Height: 37.5in
Stock#: 13262
In Stock
Hoppmann FT 50 Centrifugal Sorter

- FT/50RD
- In excellent running condition
- Includes electrical interlocks on covers

-Diameter: 68in
-Circumference of Dome: 213.62
-Height: 62in
-Dome Height: 37.5in
Stock#: 13263
In Stock
Hoppmann FT 50 Centrifugal Sorter

- FT/50
- In excellent Running Condition
- Includes Electrical Interlocks on Covers

- Diameter: 70in
- Circumference of Dome: 220in
- Height: 52in
- Dome Height: 26in
Stock#: 13264
In Stock
Hoppmann FT 50 Centrifugal Sorter

- In Excellent Running Condition
- Includes Electrical Interlocks on Covers

- Diameter: 70in
- Circumference of Dome: 220in
- Height: 52in
- Dome Height: 26in
Stock#: 13265
In Stock
Page: 1 of 2
Direct Capital NFIB Member Better Business Bureau A+ Member PMMI Member
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.