Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981


View Machinery by Category

Machinery and Equipment - View by Category

Items Displayed are limited to machinery and equipment currently located at our facility. BPDM has many other items listed that are either surplus in the field or scheduled for removal.

To best serve our customers these categories are very specific. If you do not see the machinery you are looking for below please refine your search or do not hesitate to contact us.

Page: 1 of 1
APM Tray Bundler

-Dual Roll Unregistered Film Bundler
-Intermittent Motion Using Dual Case Stops
-Mesh Style Tunnel Conveyor Belt
-Whole System w/ Tunnel

Idle Rollers Between Take Away Conveyor and Tunnel Conveyor
-Length: 19in
-Width: 18in

Presureless Roller/Dual Chain Infeed Conveyor
-Length: 5ft

Seal Bar
-Width: 27in

Tunnel Conveyor Belt
-Length: 104in

-Length: 74in
Stock#: 13183
In Stock
Arpac Multipacker / Shrinkpacker

- Inline Multipacker / Shrinkpacker
- Self-contained bundler and shrink tunnel
- Dual roll Film Feed
- 36" wide conveyor
- 18" wide seal bar x 11" tall seal bar opening
- 21" maximum film width
- Allen-Bradley Processor
- Chain driven roller conveyor at entrance end of wrapper.
- Machine is 480V / 3 / 60hz.
- Physical machine dimensions.: 18' long x 5' wide x 6.5' tall.
- Comes with the Mating Servo Driven 4 Lane Laner
Stock#: 12497
In Stock
Arpac Tray Wrapper/Bundler

-Registered Film Tray Wrapper
-Heavy-Duty Frame Construction
-Powder Coat Finish
-Fully Guarded for Safety and Easy Access
-Servo Driven Overwrap
-Allen-Bradley® Programmable Controller
-On-Demand Wrapping Action
-3-Way Cooling Section at Tunnel Exit
-Central Point Lubrication
-Air Conditioning Standard on Main Electrical Enclosure
-Up to Trays per minute

-30 CFM

-Film Width: 6"min; 26"max
-Clear, Print Registered, or Randomly Printed
-Film Roll Diameter: up to 20"width w/ 3" core
-Film Gauge: 1.75mil to 2.5mil
-Film Type: Polyethylene

-x3 Matte Top Conveyor

--------ARPAC SHRINK TUNNEL--------

-(Line 8)
-All stainless teel
-Lane infeed for arpac unit
-Stainless lane mass flow conveyor
-Complete Bundling System

-Dual Zone Temp Control
-Allen Bradley Panel View Plus 1000
-Integrated Cooling Air Knife @ Discharge

-Volts: 460
-PH: 3
-Hz: 60

-Length: 70in
-Width: 32in
-Arpac Shrink Tunnel
Stock#: 13213
In Stock
Double Tight / Cross Wrap Bundler

- 480V 60Hz 3 Phase
- 55 units per min.- 60 units per min.
- S-configuration with 600/750 side feed stretch unit
- Model 30/20 Shrink Tunnel & Cooling Belt
- Infeed Conditioning and Collating Unit
Stock#: 13109
In Stock
Douglas Multiwrapper w/ Tunnel

- Ran .5L in 6, 12, 24 & 32 packs & 16oz, 24oz, & 1L in 6 and 12 pack trays
- Ran preformed 6 pack bundles in trays
- Integrated Pad Support feed system
- Will wrap loose, trayed and pad supported product
- Footprint: 45' L x 6' W x 8' H
- 50 bundles per minute
- Infeed table and take away conveyor also included
- 480V / 3 / 60.
- FLA 179 amps.
- Largest motor rated at 10.2 amps.
- DOM 12/2002
Stock#: 12616
In Stock
Kister Multipacker / Shrinkpacker

- Kisters registered film multipacker / tray wrapper / sealer capable of producing 80 trays / minute.
- The machine comes with a shrink tunnel listed separately
- Last running 6 pack pts. and 3 pack qts.
- Control cabinet is 104" long x 24" deep x 90" tall
-Foot Print: 28" x 68" x 80" tall
Stock#: 12459
In Stock
Krones Kettner Variopac Multi-Packer

- S/S heat tunnel. Tunnel entrance is 36" W x 16" H.
- Includes cooling tunnel section with PLC controls.
- Type ST9070D tunnel-serial # 000753.
- Single Roll type registered film multi-packer
- 60 cycles per minute dual lane = up 120 packs per min
- Continuous motion packing and shrink wrapping of single products or multi-packs at rates of 18 to 120 cycles per minute.
- The fully-automated unit is designed to handle cans, bottles, and other metal plastic or glass containers as it bundles them unsupported using registered or clear film.
Stock#: 12690
In Stock
Weldotron Automatic Tray Bundler

- 230 Volt - single phase
- Produces up to 20 packages per minute
- Exclusive Dynaband Sealing System
- Power roller infeed
- Powered film feed
- Automatic air-operated product pusher
Stock#: 12433
In Stock
Arpac Bundler / Wrapper with Tunnel:

- Inline Bundler shrink tunnel machine.
- Chain driven roller conveyor at entrance end of wrapper.
- Wrapped product enters a 14" high x 28" wide tunnel opening via a 21" wide silicone topped belt.
- Machine is 480V / 3 / 60hz.
- Physical machine dimensions.: 18' long x 5' wide x 6.5' tall.
Stock#: 12471
Sold - Contact us for similar option
Arpac Bundler / Wrapper with Tunnel:

- Completely Rebuilt ARPAC Shrink Wrap System
- Model 105-28 self-contained bundler and shrink tunnel OEM rated up to 30 TPM depending on application
- Straight-thru operation 28" wide seal bar x 11" tall seal bar opening 27" maximum film width
- Wrapped product enters a 14" high x 28" wide tunnel opening via a 21" wide silicone topped belt.
- Allen-Bradley SLC 150 Processor
- Electrical: 460V - 3Ph - 60Hz
- Footprint: 50"W x 180"L (add 39 inch to length for in feed conveyor)
- In feed to system is a 3 to 1 laner - model 104 CM-20 Serial # 1659
Stock#: 12377
Sold - Contact us for similar option
Page: 1 of 1
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.