Copy
BPDM Blog

High Speed Bottling Equipment In Stock Available for Immediate Export

 

We would like to take a moment of your time to review several high output pieces of equipment in stock that are available for immediate export. 

We would work with you closely in terms of the supply of this equipment as they can be shipped in their current condition, rebuilt, and or upgraded both mechanically and in terms of control systems.

This equipment can be supplied fully configured for specific applications, and tested prior to shipment from our facility.

Please contact us at your convenience with any questions or other requests at (610) 916-0666

If you have a current project that requires machinery not listed below, please do not hesitate to contact us with your equipment specifications. 
BPDM Blog
Ronchi 40-20 Filler / Screw Capper

*Available for Inspection Under Power, Fully Operational*

- High filling accuracy= 0.2%
- Mass Flow Meter Volumetric Filling
- All 304 Stainless Steel
- Rising Pedestal Filling Turret - No product spillage during filling process 
- Automated CIP Process with Automatic Catch Pan
-10" Centers Filler and Capping Turret
- Last Running "Sunny Delight" Product
   
- All Components Readily Available
         - Allen Bradley Controls Throughout
         - New Direct Replacement Flow Meters: ENDRESS Hauser SK 344-001 DOSIMAG A
BPDM Blog
Krones Sensomatic 90-120-36 Triblock 

- Model Sensomatic
- 90 Head Inverting Rinser
- 120 Valve Filler
- 36 head Ultra PK Capping Turret
- Neck Handling throughout Entire System
- Includes Pneumatic Cap Feed System
- Capable of Hot Fill and Cold Fill of Still Products
- Entire Fluid Handling System With Large Tank and Controls Included
- Removed fully operational - All Cables properly disconnected and bundled
- Unit is in LIKE-NEW Condition
BPDM Blog
Filler Specialties 54-18 Filler / Screw Capper

- 54 valve filler with 18 Head Capping Turret
- Cap in head transfer
- 4-3/16" valve / chuck centers
- Currently Set up with 7/8" nozzles and 38mm chucks
- Waterfall style cap sorter
- Stainless Steel Construction
Linker 60-20 Filler / Screw Capper

- 60-Valve filler w/ 20-Station Capping Turret
- Cap in head transfer
- 4-3/8" valve / chuck centers
- Currently Set-Up with 3/4" Valves and 28 mm Caps
- Neck support filler and Capping Turret 
KHS 90-20 Filler / Screw Capper

- 90 valve Filler
- Upgraded Whitecap 20 Head Capping Turret
- Steam capability for capping
- Currently Set 7/8" Valves and 43 mm Chucks
- Allen Bradley PanelView 1000
The Used Complete 500BPM PET Water Bottling Line was initially delivered and installed in 2003. The Line is a used PET water bottling low complete from Blow Molder (Moulder) to Pallet Wrapper. The line is currently running 27,500 BPH on 500ml PET Bottles with 8.5 gram preforms. The blow molder is a 2003 SIDEL SBO 18 that includes the blow wheel, oven, electrical control panel, main cabinet, preform dumper, hopper, incline, orientor, slide chute. The filler is a LINKER Mono-Block 48 valve PET bottle filler with a 16 head capping turret set on 26.7mm lightweight plastic screw caps.
 
Currently running 27,500 BPH on 500ml PET Bottles

 *Available with or without blow molder* 

The Used Complete 500BPM PET Water Bottling Line comes with a LANGGUTH Cut and Stack Bottle Labeler with a Nordson ProBlue Hot Melt System. This line features versatile SMI packaging running 6-packs, 8-packs 24-pack, 32-pack and 40-pack supported or unsupported; nested or square packs.

If you are looking for a quality water bottling line with a stellar ROI, do not allow this system to get away from you!
Please reply to this email or contact us at 610-916-0666 ext.102.
We thank you in advance for any and all submissions.
  Home   |    Product Lines    |    About Us    |    Contact Us 
Copyright © 2018 Berks Plant Design & Maintenance Inc, All rights reserved.

Berks Plant Design & Maintenance |150 Birch Hill Road | Shoemakersville, PA 19555
Phone: 610-916-0666 | Fax: 610-926-1584 | Email: info@bpdm.com