Machinery and Equipment - View by Category
Items Displayed are limited to machinery and equipment currently located at our facility.
BPDM has many other items listed that are either surplus in the field or scheduled for removal.
To best serve our customers these categories are very specific.
If you do not see the machinery you are looking for below please
refine your search or do not hesitate to contact us.
Page: 1 of 1
Combi Automatic Case Erector
- Small footprint case erector for sizes from 8 1/2 " x 4 3/4" x 4" to a max size of 16-1/2" x 12-1/4 " x 19 1/2 ".
- Erects Cases for Packing
- Once cases are packed, a top and bottom case taper would be used to seal Cases
- 230V 3-phase electric.
- 80 PSI - 5CFM@12CPM.
Stock#: 12093
In Stock
Marq Automatic Case Erector
- Case erector / bottom sealer using pressure sensitive tape.
- Compuserve touch panel Controls
- Machine capable of erecting 10-15 Cases per minute
- 110V single phase power required along with 10SCFM free air @80psi
- Case size range: 8" to 20" in Length; 6" to 19" in Width; 8" to 15" in Height.
- Flat knockdown case range: 16" to 35" L; 12" to 31" W.
- 30" Long flat case magazine.
- 2" Pressure sensitive tape head.
- OAD: 90" (L) x 60" (W) x 62" (H)
Stock#: 12356
In Stock
Marq Automatic Case Erector
- Case erector / bottom sealer using pressure sensitive tape.
- Compuserve touch panel machine capable of erecting 600 CPH.
- 110V single phase power required along with 10SCFM free air @80psi
Stock#: 12250
In Stock
Marq Automatic Case Erector
- Case erector / bottom sealer using pressure sensitive tape.
- Compuserve touch panel Controls
- Machine capable of erecting 10-15 Cases per minute
- 110V single phase power required along with 10SCFM free air @80psi
- Case size range: 8" to 20" in Length; 6" to 19" in Width; 8" to 15" in Height.
- Flat knockdown case range: 16" to 35" L; 12" to 31" W.
- 30" Long flat case magazine.
- 2" Pressure sensitive tape Head
- OAD: 90" (L) x 60" (W) x 62" (H)
Stock#: 12355
In Stock
Marq HPE Automatic Case Erector
- Model #: HPE315-3RH-DL
- Footprint: 93" L x 87" W x 80" H
- Continuous Feed Magazine
- Top/Bottom Vacuum Suction Cup Pick Off
- Lugged Chain Case Conveyor
- Minor/Major Flap Closers
- Top Squaring device
- 3m Accuglide Presure Sensitive 3" Tape Head
- Safety Guarding
Case Size Range:
-Length: 8" - 27"
-Width: 5.25" - 17"
-Height: 2.5" to 18"
Stock#: 13090
In Stock
Wexxar Automatic Case Erector
- 6' H x 4' W x 20' L
- Unit erects and tapes corrugated cases
- Powered dual screws blank case magazine
- Unit has been cycle tested
- PLC controlled
- Automatic Case Erector and Bottom Tape Sealer
- Capable of speeds up to 20 cases per minute
Case Size Range:
-Length: 13in to 42in
-Width: 11in to 29in
-Depth: 7in-24in
-Pin and Dome Case Erecting System with Minor and Major Bottom Flat Closers
Stock#: 13084
In Stock
Durable Case Erector
- Rebuilt automatic case erector with three side positive case squaring.
- Pressure sensitive 2" bottom tape head
- Erects and bottom seals cases at up to 25 cases per minute.
- Left hand machine.
- Minimum case size: 7" L x 6" W x 4" H.
- Maximum case size: 20" L x 16" W x 16" H.
- Magazine capacity approximately 125 - 200 Lb test cases.
- Requires 90 psi air
- 110 V single phase.
Stock#: 12107
Sold - Contact us for similar option
Wepackit 720 Automatic Case Erector
- 40in x 72in Footprint
- Fast Changeovers
- Simple and Safe Vertical Magazine That Advances Cases Consistently
- Magazine Capacity for Approximately 100 'C' Flute Cases @ 29 ECT Minimum
-Speeds up to 15 Cases per Minute
- Positive Slide-Gripping Belts
- Guard Package C/W Interlocks
- PLC Controls
- Mild Steel Construction with Steel-it Stainless Steel Epoxy
- Tape Bottom Sealer (2in Tape Head)
- Standard Discharge Height 24in
- Castors for Portability
- UL/CSA Approved Components Only
Case Dimensions:
-Estimated Length: 6 min / 16 max
-Estimated Width: 5.5 min / 14 max
-Estimated Depth: 4.5 min / 16 max
Stock#: 13274
Sold - Contact us for similar option
Wepackit 720 Automatic Case Erector
- 40in x 72in Footprint
- Fast Changeovers
- Simple and Safe Vertical Magazine That Advances Cases Consistently
- Magazine Capacity for Approximately 100 'C' Flute Cases @ 29 ECT Minimum
-Speeds up to 15 Cases per Minute
- Positive Slide-Gripping Belts
- Guard Package C/W Interlocks
- PLC Controls
- Mild Steel Construction with Steel-it Stainless Steel Epoxy
- Tape Bottom Sealer (2in Tape Head)
- Standard Discharge Height 24in
- Castors for Portability
- UL/CSA Approved Components Only
Case Dimensions:
-Estimated Length: 6 min / 16 max
-Estimated Width: 5.5 min / 14 max
-Estimated Depth: 4.5 min / 16 max
Stock#: 13275
Sold - Contact us for similar option