Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981

610-916-0666

View Machinery by Category
-OR-

Machinery and Equipment - View by Category

Items Displayed are limited to machinery and equipment currently located at our facility. BPDM has many other items listed that are either surplus in the field or scheduled for removal.

To best serve our customers these categories are very specific. If you do not see the machinery you are looking for below please refine your search or do not hesitate to contact us.


Page: 1 of 1
Axon 400SL Sleeve Labeler or Neck Bander

- Sleeve Labeler/Neck Bander
- 400 containers per minute (single head)
- Volts: 230 3PH 60Hz 50A
- Emergency Stop Feature
-Main Disconnect Switch
- Height: 90in
- Width: 71-1/2in
- Height: 46-1/2in
- Allen-Bradley Panel View Plus 600 (On 90° rotating arm)
- Processes both full body sleeves and tamper evident bands
- Thin Gauge Film Capabilities
- Container Size: 1-1/4in to 4-3/4in Diameter
Stock#: 13276
In Stock

Axon EZ 200 Sleeve Labeler or Neck Bander

- EZ-Series Model EZ200

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12733
In Stock

Axon EZ 200 Sleeve Labeler or Neck Bander

- EZ-Series Model EZ200

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm

*Speeds dependent on container size
Stock#: 12800
In Stock

Krones Sleevematic Sleeve Labeler and Neck Bander

- Right to Left Direction
- Film Expanding Mandrel
- Film Cutting Unit w/ Several Servo-Controlled Cutters
- Sleeve Length Infinitely Adjustable
- Electronic Film Registration
- Integral Tempered Glass Machine Guarding
Stock#: 13272
In Stock

PDC 50-ERL Sleeve Labeler and Neck Bander

- Fully enclosed and interlocked for safety
- Twin feed screws at infeed
- 3-1/4" tabletop chain conveyor
- Container inspection with eject system on outfeed conveyor
- 22" label stock reels (2) with splicing table
- OAD: 10' L x 5' Deep x 76" Tall (Add 14" for status light)
- 480V 3phase
Stock#: 13047
In Stock

PDC R300 Sleeve Labeler System

- Consists of R300 Sleeve Labeler, 3 Zone Heat Tunnel (KAL300) and a Dual Roll Label Unwinder (UW-20)

LABELER

- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP

DUAL LABEL UNWINDER

- Dual Roll Lqabel Unwidner with Splice
- DIMS: 32"L x 55"W x 86"H

HEAT TUNNEL

- 3 Zone All Stainless Heat Tunnel
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12804
In Stock

PDC R300 Sleeve Labeler System

- Consists of R300 Sleeve Labeler, 3 Zone Heat Tunnel (KAL300) and a Dual Roll Label Unwinder (UW-20)

LABELER

- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP

DUAL LABEL UNWINDER

- Dual Roll Lqabel Unwidner with Splice
- DIMS: 32"L x 55"W x 86"H

HEAT TUNNEL

- 3 Zone All Stainless Heat Tunnel
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12805
In Stock

PDC R300 Sleeve Labeler System

- Consists of R300 Sleeve Labeler, 3 Zone Heat Tunnel (KAL300) and a Dual Roll Label Unwinder (UW-20)

LABELER

- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP

DUAL LABEL UNWINDER

- Dual Roll Lqabel Unwidner with Splice
- DIMS: 32"L x 55"W x 86"H

HEAT TUNNEL

- 3 Zone All Stainless Heat Tunnel
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12806
In Stock

Axon EZ 200 Sleeve Labeler or Neck Bander

- EZ-Series Model EZ200

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm

*Speeds dependent on container size
Stock#: 12801
Sold - Contact us for similar option

Axon EZ 200 Sleeve Labeler or Neck Bander

- EZ-Series Model EZ200

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12734
Sold - Contact us for similar option

Axon EZ 200 Sleeve Labeler or Neck Bander

- Model EZ- 200
- Banding head rated atup to 60 bpm.
- PLC control. Stepper film feed drive system.
- User friendly operator interface.
- Stainless steel frame and enclosure.
- Quick change container size features.
- 110 volts
Stock#: 12254
Sold - Contact us for similar option

Axon EZ100 Sleeve Labeler or Neck Bander

- One Skid Mounted Axon EZ-100 Sleeve Labeler/Neck Bander
- Two 48" shrink tunnels (dual zone Shrink)
- Film registration
- Horizontal perforation assembly
- Cooled Integral table top conveyor
- All Stainless Steel construction
- Unit has already been reconditioned setup tested and is in excellent running condition still threaded.
- 480 volts
Stock#: 12429
Sold - Contact us for similar option

Page: 1 of 1
Direct Capital NFIB Member Better Business Bureau A+ Member PMMI Member
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.