Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981

610-916-0666

View Machinery by Category
-OR-

Machinery and Equipment - View by Category

Items Displayed are limited to machinery and equipment currently located at our facility. BPDM has many other items listed that are either surplus in the field or scheduled for removal.

To best serve our customers these categories are very specific. If you do not see the machinery you are looking for below please refine your search or do not hesitate to contact us.


Page: 1 of 1
Del Ozone Generator - Ozonator

The system consists of the following items:

- Pressurization and circulating pumps,
- OPR controller
- Relative humidity sensor
- Balance barometer and dew point sensor.
- Genesis Corona Discharge Ozone Generator model CD-7G rated at 7 g/hr
- Max flow rate of 7 SCFH indicated on a 0-10 SCFH system flow meter
- 50 gallon stainless steel storage tank with an Airtech Oiless compressor pump mounted above.
- Unit is 230 volt single phase
- Skid mounted system - 2" tubular frame with 2" standoffs - 56" x 44"
Stock#: 12701
In Stock

Orec Ozone Generator

- 0-12 GPH Flow Meter
- Water inlet / outlet and ozone outlet ports
- Plastic lens covered control panel
- 120 V single phase operating voltage w/ disconnect
- Cabinet Dims: 21"W x 14" Deep x 45" Tall
- Gray painted steel cabinet
Stock#: 12879
In Stock

Osmonics Ozone Contact Tank

- 188 gallon capacity
- 2-1/2" tri-clamp inlet / 2" tri-clamp outlet
- 2 monitoring ports / 1 injection port
- 24" flanged inspection porthole, side mounted
- 9 ft tall x 24" diameter
Stock#: 12878
In Stock

Ozone Contact Tank

- All Stainless Steel Construction
- 340 gallon capacity
- 15" flanged port with inspection lens and 2" tri-clamp fitting
- OAD: 92" Tall x 36" D
- Injection port 3/4"NPT
- Monitoring ports 3/4" NPT
- 2" NPT inlet & outlet
- 1-1/2" additional port on top
Stock#: 13040
In Stock

Ozone Generator - Ozonator

Compact and easy to install, the P-2000 corona discharge wall-mount delivers a high ozone output. Built with a dual reaction chamber and powder coated enclosure, the P-2000 is engineered for superior water sanitation.

Dimensions: 23.0" h x 20.25" w x 5.50" d, 49 lbs.
Ozone Output: 5.6 grams/hour @ 14 SCFH on dry air,
14 grams/hour @ 14 SCFH on oxygen

DESIGN FEATURES

- Compact, wall-mounted
- 1% to 6% wt. concentration
- Computer grade universal power supply
- Pressurized or vacuum delivery
- Oxygen or dry air feed
- Remote 4-20 mA control
- Manual 0-100% ozone output control
Stock#: 12420
In Stock

Purewater Ozone Water Purifier

Skid consists of:

- ClearWater Technologies LLC
- 7.7 grams per hour
- ClearWater generator model CD12
- 90 - 260V / 50-60 hz / 1.5 - 0.6 Amps
- Gould centrifugal pump with 1-1/4" inlet and 1" outlet
- Oxygen generator - 80% @ 8scfh
- UV - Wedeco model SSWEH-20
- Skid dims: 32" x 32" x 54"Tall
- 220 V single phase
Stock#: 12876
In Stock

UV Sterilizer

- 36" Stainless steel single tube UV
- 120 volts @ .06 amps
- 3/4" inlet & outlet ports
Stock#: P2401
In Stock

UV Sterilizer

- Single tube UV sterilizer
- 2" MPT inlet and outlet.
- 120 volt unit rated at 40 gpm.
- 36" long chamber
- Manual tube wiper
Stock#: P2305
In Stock

UV Sterilizer

- All stainless steel construction
- 3" FNPT inlet and outlet ports
- 3/4" FNPT monitoring port
- 30" long x 8" diameter chamber
- 120V single phase
Stock#: 13041
In Stock

UV Water Treatment System

- Water filter, UV and post treatment equipment
- Inlet filter is a canister type with a 25/1 micron cartridge
- 1" inlet x 1" outlet
- Final filter is a 1 micron bag type filter
- UV sterilizer is a Wedeco model SSWEH-20
- Bag type 1 micron pre-filter
- Entire system is skid mounted
- Footprint: 30"L x 24"D x 55"Tall
- 110 V / 1PH / 60hz
Stock#: 12875
In Stock

Stock#: P2440
In Stock

RO Water Purification System

- Approximately 75 gpm product flow rate
- 3" Schedule 80 supply inlet
- 2" SS pump outlet to vessels
- 30 HP Tonka Flow Pump
- 230-460 / 3 / 60 hz
- 5 - 8" x 15' long Code Line 4 membrane vessel system
- Model E8L RO vessels
- Conductivity element and monitor
- LCD % rejection rate indicator
- Siemens supported system
- 2739 run hours
Stock#: 12736
Sold - Contact us for similar option

Page: 1 of 1
Direct Capital NFIB Member Better Business Bureau A+ Member PMMI Member
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.