Used Heat Shrink Tunnels

BPDM can supply a variety of Used Heat Shrink Tunnels, either as-is, reconditioned or rebuilt. Machines are also commonly supplied ready for production.

Other Types of Used Tunnels

Learn More About Berks Plant Design and Maintenance, Inc.

HOW IT WORKS

Used Heat Shrink Tunnels are an enclosed and heated area that is used to not just apply heat to an object, but create a heated local environment around said object. Used Heat Shrink Tunnels will generally be found surrounding or above a section of conveyor belt. This allows automated travel throughout the tunnel.

Used Heat Shrink Tunnels work by transferring energy from a heat source to an object within an enclosed area. With this, multiple goals may be sought after, including to shrink film or label, to cure a coating of paint, removing any excess water or moisture, or any other application that requires an immersion in heat. Depending on the heat source used and capacity, the material being heated, and the time of residency in the tunnel, the amount of energy being transferred varies.

COMMERCIAL APPLICATION

Used Heat Shrink Tunnels may use hot air as a heat transfer medium. Used Heat Shrink Tunnels using hot air are typically double walled, with a solid exterior wall and a perforated interior wall. Between the walls, hot air is injected at an adequate pressure by either a hot air heater or a hot air blower. The volume and pressure of hot air combined with the pattern of perforations in the interior wall, allow for the manipulation of multiple heating zones. Used Heat Shrink Tunnels using hot air are a suitable choice for most applications.

Used Heat Shrink Tunnels most commonly used shrink materials are PVC, PETG, and PLA. PVC, PETG, and PLA materials shrink because, during manufacturing, they are stretched until their polymer chains are almost aligned; putting the materials in an unnatural state. Then having heat applied, these materials revert back to their natural state, resulting in their shrinking.

EXAMPLE IMAGES - FOR ILLUSTRATION PURPOSES ONLY

Used Heat Shrink Tunnel
Used Heat Shrink Tunnel
Used Heat Shrink Tunnel

Berks Plant Design & Maintenance Services

Berks Plant Design & Maintenance is a supplier of in their current condition, reconditioned, or rebuilt. may be supplied with the proper parts and tooling to meet application specific requirements. Our mission is to supply reliable and efficient for your production needs as well as the project's budget. Many times, our are already in good running condition, or in many cases are in LIKE-NEW condition. can be tooled, customized, or upgraded upon request to suit a variety of bottling, packaging, and processing needs.

Berks Plant Design & Maintenance is a supplier of Fully Reconditioned . BPDM defines reconditioned machines such-as , that have been thoroughly inspected, then repaired as needed to be supplied to the customer in excellent running condition.

BPDM Supplies rebuilt machines such-as , which has had every wearable component replaced. Gearboxes are replaced or rebuilt to new standards. Controls are modified or upgraded as per customer's needs.

When you're looking for the right for your application, Berks Plant Design & Maintenance has a large selection of to choose from our expansive inventory, or by sourcing the proper either recently removed or scheduled to be removed. --->